The Dr. LED Light Bar/Strip Light is a motion controlled, dimmable, 12V light that is available in a 12″ or 20″ length.
Features:
- Non-Contact Infrared Motion-controlled On/Off/Dimming LED light bars
- Easy installation & operation
- Turns on to the last light setting
- Move your hand or finger across the sensor (within 1″) to turn light on or off
- Light turns on to the last intensity setting
- While the light is on, hold your hand in front of the sensor to adjust light intensity
- Maintain your position in front of the sensor to brighten or dim the light
- Light will alternately brighten or dim
12″ Light Bar Specifications:
- LED Color: Warm White, 2,700K
- Output: 280 Lumens
- Beam Angle: 150 Degrees
- Voltage: 12V DC
- Max Input Power: 5W
- Current Draw: 0.4A
- Motion-Sensor Idle Current: 0.01A
- Electrical Connection: 20″ 22AWG UL2468 Pigtail (polarized barrel connector on one end, bare positive/negative wires on the other)
- Polarized Connection
- Operating Temperature: -4° F to 140° F (-20° C to +60° C)
- Water Ingress Rating: IP20
- Finish Color: Silver
- Mounting Hardware: Stainless snap-on brackets, pigtail
- Dimensions (L x W x H): 11.8″ x 1.2″ x 0.5″
- Weight: 2.8 oz
20″ Light Bar Specifications:
- LED Color: Warm White, 2,700K
- Output: 430 Lumens
- Beam Angle: 150 Degrees
- Voltage: 12V DC
- Max Input Power: 7.2W
- Current Draw: 0.6A
- Motion-Sensor Idle Current: 0.01A
- Electrical Connection: 20″ 22AWG UL2468 Pigtail (polarized barrel connector on one end, bare positive/negative wires on the other)
- Polarized Connection
- Operating Temperature: -4° F to 140° F (-20° C to +60° C)
- Water Ingress Rating: IP20
- Finish Color: Silver
- Mounting Hardware: Stainless snap-on brackets, pigtail
- Dimensions (L x W x H): 19.7″ x 1.2″ x 0.5″
- Weight: 4.7 oz
Dr. LED Conversion Guide (1.55 MB)
